Autoped

Classic Bikes > Autoped > Autoped

Autoped
Manufacturer Autoped Company, Krupp
Also called Krupp-Roller
Production 1915-1921 (Autoped)
1919-1922 (Krupp)
Class Motor scooter
Motorized scooter
Engine 155 cc air-cooled single (Autoped)
191 cc air-cooled single (Krupp)
Bore / Stroke 56 mm x 63 mm (Autoped)
Top speed 20 mph (32 km/h) (Autoped)
35 km/h (22 mph) (Krupp)
Power 1.5 hp (1.1 kW) (Autoped)
1.3 kW (1.7 hp) (Krupp)
Transmission clutch operated by handlebar column
Frame type welded steel
Suspension none
Tires 10 inches (250 mm) diameter

The Autoped was an early motor scooter or motorized scooter manufactured by the Autoped Company of Long Island City, New York from 1915 to 1921.

The driver stood on a platform with 10-inch tires and operated the machine using only the handlebars and steering column, pushing them forward to engage the clutch, using a lever on the handlebar to control the throttle, and pulling the handlebars and column back to disengage the clutch and apply the brake. After riding, the steering column would be folded onto the platform to store the scooter more easily. The engine was an air-cooled, 4-stroke, 155 cc engine over the front wheel. The bike came with a headlamp and tail lamp, a Klaxon horn, and a toolbox. Developed during wartime and gasoline rationing, it was quite efficient, but was not widely distributed.

A patent for the Autoped as a "self-propelled vehicle" was applied for in July 1913 and granted in July 1916. An early description of the Autoped described it as having a hollow steering column that acted as the fuel tank. However, the production version had a fuel tank above the front mudguard.

The Autoped went out of production in the United States in 1921, but was manufactured by Krupp in Germany from 1919 to 1922.

This article uses material from the Wikipedia article Autoped,
which is released under the Creative Commons Attribution-Share-Alike License 3.0.

Available on eBay

More Pictures

Crescent Autoped